--- title: FAQ description: A quick guide to InnaLabs® Coriolis Vibratory Gyroscope and Quartz Servo Accelerometer. --- [![innalabst logo](https://www.innalabs.com/hs-fs/hubfs/Logos/innalabst%20logo.png?width=1501&height=462&name=innalabst%20logo.png) ![InnaLabs](https://www.innalabs.com/hs-fs/hubfs/Logos/innalabs%20logo%20posi%20cmyk_transparent.png?width=1501&height=473&name=innalabs%20logo%20posi%20cmyk_transparent.png) ](https://www.innalabs.com?hsLang=en) [**](https://www.innalabs.com/faq#tmpmodule_1566512947357920) ** ![Space Satellite Technology Background](https://www.innalabs.com/hs-fs/hubfs/Applications%201000%20x%201000/Space%20Satellite%20Technology%20Background.jpg?width=1000&height=1000&name=Space%20Satellite%20Technology%20Background.jpg) # FAQ #### A quick guide to our most popular gyroscope and accelerometer questions. ### **Accelerometers ** - #### My performance requirements are very rigorous, which accelerometers would meet my needs? Our AI-Q-2010 accelerometer offer navigation grade performance with excellent reliability and fast delivery. - #### My performance requirements are below "Navigation standards" & my budget is limited, which accelerometers would match my needs? The AI-Q-710 accelerometer offers performance between tactical and navigation grade at cost-competitive prices. - #### Which accelerometer is best for my application? We can guide you in the choice of the correct accelerometer for your application. You can choose between AI-Q-710, AI-Q-1410, and AI-Q-2010 depending on the desired measurement range, bias and scale factor composite repeatability and temperature sensitivity requirements. AI-Q-710 has a smaller casing which is suitable for applications driven by volume constraints. - #### What distinguishes your family of products, from your competitors? Our products have been developed to meet the moderate to high-performance requirements of our customers. They have low output errors, low intrinsic noise, and very high bias and scale factor repeatability. They are built in Europe, offer excellent low term stability and are ITAR free. Their performance is supported with exceptional delivery times and very competitive pricing. - #### What Load resistor should I use? The external resistor used affects the maximum g-range measurable by the test system, due to voltage drop across both it and the internal coil resistance. As the input voltage is increased, a larger voltage drop is available, enabling the same acceleration level to be measured with a larger measurement resistor, thus improving the signal-to-noise ratio. - #### How can I purchase InnaLabs® Accelerometers? To purchase please contact your local InnaLabs® Global Sales Network or InnaLabs®. ### **Gyroscopes ** - #### What configurations of the gyroscope are available? InnaLabs® currently offer 1, 2, and 3 axes gyros, with either analog or digital output. The gyros can be shipped either within a casing or with separated sensitive elements and electronics box. Finally, two different performance ranges are available. - #### Is it possible to customise your gyroscopes? Yes, it is. We can change physical configuration, mechanical and electrical interface, as well as customize performance according to customer requests. - #### What material is used in InnaLabs® Gyroscope housing? The material of the InnaLabs® gyroscope housing is aluminium. The user should preferably use an aluminium base plate and dowel for mounting. - #### What is measurement range (input rate limits) for the InnaLabs® gyroscope? Input rates limits are ≤110°/s for analogue gyros and ≤160°/s for digital ones. The gyroscope cannot be damaged when the input rate exceeds the input rate limits. Once the input rate comes back within the limits, the recovery time to get a functional output with full performances is less than 3 sec. - #### What is the warm-up time of the Innalabs® gyroscopes? The InnaLabs® gyroscope achieves full performance within the first 10 minutes after start-up (bias and scale factor). Over the first 10 min, at room temperature, the gyroscope bias error can drift by 15 °/hr, with a typical value of 3 °/hr peak. - #### Is InnaLabs® Gyroscope’s power supply board protected from short circuits? Yes, the InnaLabs® gyroscope’s power supply board is protected against short circuits, so any output can be short-circuited without damage. - #### Is the InnaLabs® gyroscope protected against corrosion? The InnaLabs® Coriolis vibratory gyroscopes are fully protected against corrosion thanks to a hard-anodized surface treatment. The gyroscopes are tolerant to 50°C combined with 95% humidity. ### **Support Services** - #### What type of support do you offer? With the purchase of InnaLabs®  sensors, you get unlimited customer support.  - #### Do you Bespoke Solutions? Yes, InnaLabs®  offers custom solutions to meet your project needs. ### **General** - #### What type of inertial sensors are manufactured by InnaLabs®? InnaLabs® is a leading manufacturer of high-performance inertial sensors, including Tactical grade Coriolis Vibratory Gyroscopes and Navigation grade, Quartz Servo Accelerometers. InnaLabs® offers solutions for the Aerospace, Subsea, Marine, Space, Energy, Industrial, Civil Engineering, and Transportation markets. - #### How can I purchase InnaLabs® Sensor? To purchase please contact your local InnaLabs® Global Sales Network or InnaLabs®. - #### What's your turn around time? Quick customizations can often happen same day or within 48 hours depending on the request.  Other larger projects are discussed on a case by case basis. At the end of the day, I'm lightening fast. It's one of my superpowers. :) #### Can't find the answer you're looking for? Contact our Team for an immediate consultation.  [![Contact Us](https://no-cache.hubspot.com/cta/default/6876974/bb2e15d6-9918-48d8-97c8-ee95ea9f0954.png)](https://cta-redirect.hubspot.com/cta/redirect/6876974/bb2e15d6-9918-48d8-97c8-ee95ea9f0954)  ##### Navigate Navigate ##### Download Download ##### Talk to Us Talk to Us ##### Recent News [**](https://www.facebook.com/InnaLabsIreland/) [**](https://twitter.com/InnaLabs/) [**](https://www.linkedin.com/company/1370644/) [**](https://www.youtube.com/channel/UCfBgxQ2mDj_V5ZNuLm2fRnw) [![InnaLabs Logo](https://www.innalabs.com/hs-fs/hubfs/orlogo.png?width=283&height=86&name=orlogo.png "InnaLabs Logo")](https://www.innalabs.com?hsLang=en) InnaLabs® Copyright © 2022 | All Rights Reserved. Telephone: +353 1 809 6 200 Fax: +353 1 809 6 202 Address: Blanchardstown Industrial Park, Snugborough Road, Blanchardstown, Dublin 15, Ireland. Eircode: D15 E682 **